Happymodel Bassline 2S 2inch Micro Drone Quad ANALOG ELRS 2.4ghz SHIPS

HappyModel Bassline 2S Micro FPV Racer Drone! This high-performance drone is perfect for FPV racing and freestyle flying. With its lightweight and durable design, it can easily handle any type of flying. The Bassline 2S also features advanced flight control and video transmission technology, allowing for smooth and stable flights. Don't miss out on the excitement of FPV racing - order your HappyModel Bassline 2S today!
Specifications:

Brand Name: Happymodel

Item Name: Bassline 2S 2inch Micro FPV toothpick drone

Wheelbase: 90mm

Size: 115x115x40mm

Analog version Weight: 40g

Rx Type: ELRS 2.4GHz SPI

Motor Specifications

Motor: EX1103 KV11000

Configuration: 9N12P

Stator Diameter: 11mm

Stator Length: 3mm

Shaft Diameter: Φ1.5mm

Motor Dimension(Dia.xLen):Φ13.5x15.5mm

Weight(g): 3.8g

No.of Cells(Lipo): 1-2S

Prop Specifications

Weight: 0.88g

Material: PC

Pitch: 2.3inch

Props Dia: 52.17mm

Center Thickness:5mm

Center Hole Dia: 1.5mm

Flight Controller Specifications

X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver

Target: CRAZYBEEF4SX1280

MCU: STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: ICM20689 or ICM42688P(SPI connection)

Mount hole size: 25.5x25.5mm

Power supply: 1-2S battery input (DC 2.9V-8.7V)

Built-in 12A(each) Blheli_S 4in1 ESC

Built-in Betaflight OSD(SPI Control)

Built-in 5.8G OpenVTX 0mw~400mw

Built-in ExpressLRS 2.4GHz

Built-in voltage detection

Built-in current sensor

4in1 ESC Specifications

Power supply: 1-2S LiPo/LiPo HV

Current: 12A continuous peak 15A (3 seconds)

Support BLHeliSuite programmable

Default Factory firmware: Z_H_30_REV16_7.HEX

Default protocol: DSHOT300

Support Bluejay firmware

Onboard SPI ELRS 2.4GHz Receiver Specifications

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V2.0

RF Frequency: 2.4GHz

Antenna: SMD antenna

Telemetry output Power: <12dBm

Receiver protocol: SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module

Can flash FC firmware to support ExpressLRS v3.0 TX module

Onboard 5.8g OpenVTX Specifications

Firmware version: OPENVTX

Smartaudio v2.1

PIT Mode support

RCE Mode support

Channels:48ch

Transmitting Power: 0/RCE/25mw/100mw/400mw

Power supply: DC 5V

Current (5v): <650ma (400mw)

Caddx Ant 1200TVL Camera Specifications

Image Sensor: 1/3″ CMOS Sensor

Horizontal Resolution: 1200 TVL

TV System: NTSC or PAL

IMAGE: 16:9 or 4:3

Synchronization: Internal

Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000

S/N Ratio: >52dB (AGC OFF)

Video Output: CVBS

Lens: 1.8mm

Min. Illumination: [email protected]

Auto Gain Control: YES

WDR: Global WDR

DNR: 3D DNR

Dimensions: 14x14mm(with bracket to 19x19mm)

Wide Power Input: DC 3.7-18V

Weight: 2g (N.W.)

Included:

HappyModel BNF Bassline 2S 2" Micro Quad - ELRS 2.4GHz SPI x 1

X12 ELRS V2.1 flight controller built-in SPI ELRS 2.4G receiver x 1

EX1103 KV11000 brushless motor x 4

Gemfan toothpick 2023 tri-blade propellers(4cw+4ccw) x 1

Caddx ANT 1200TVL Camera x 1

Onboard 5.8G Openvtx 0mw~400mw VTX x 1

Canopy for 14mmx14mm camera x 1

Screwdriver x 1

Returns Accepted for this item if it's within 30 Days